User's Guide

Chapter 16: Controlling Access to the ER-1000
TR0190 Rev. A1 107
Figure 49. Custom firewall settings
16.6 Access Control Lists (ACLs)
The access control lists (ACLs) for the VAP interfaces (wlan1-wlan4) block access to any
device with a MAC address matching those on the list. Individual ACLs can be defined for each
VAP.
Web GUI
The ACLs can be defined via the web interface on the appropriate “wlanN” sub-tab under the
“ACL” tab on the “Security” page as shown in Figure 50. Enter a MAC address and click on the
“Add MAC” button to add the address to the ACL for that VAP. Once an address has been
added, it will appear at the bottom of the page. To delete a MAC address in an ACL, click on
the “Delete MAC” button next to the address.
The ACL for an VAP must be enabled after it has been created. Choose “blacklist” from the
drop-down menu and click on “Change ACL Mode” to enable the list. Choose “none” from the
drop-down menu and click on “Change ACL Mode” to disable the ACL.