User's Manual

TR-MX2
6
TR-MX2 OVERVIEW
Introduction
TR-MX2 is an all-in-One AP/WDS/CPE device. Tranzeo’s TR-MX2 series of wireless LAN
products are IEEE 802.11a/n compliant, operate in the license-free 2.4 GHz frequency
band, and support data rates of up to 300 Mbps. The versatile multi-mode design
supports AP and CPE modes, as-well-as WDS and Bridge modes. It also features advanced
networking and management capabilities including WEP/WPA/WPA2 security, WMM
QoS, and NAT Routing.
The TR-MX2 offers new options such as up to 4 Virtual Access Points, VLANS, choice of
5/10/20/40 MHz channels and Layer 2 transparent Bridging.
The compact TR-MX2 design features a high performance radio. The all-in-one design
comes complete with a passive PoE injector and DC adaptor, requiring a single CAT5
cable for power and data, yielding the lowest cost of ownership.
The TR-MX2 also features a weather-resistant enclosure that is compliant with the
IP55 environmental standards, requiring minimal installation and maintenance costs in
conditions ranging from -40° C to +60° C. The TR-MX2 family of products is also backed by
a 1-Year Parts and Labor Warranty and Tranzeo’s unparalleled Lifetime Technical Support
for worry-free network operation.
It is PoE powered, which allows the radio to be used in areas where power outlets are not
readily available. It also simplifies the installation by requiring a single Cat5e cable for
supplying power and carrying data.
The access point also incorporates a unique set of advanced features such as: up to
4 Virtual AP’s to deliver multiple services; long-range parameter fine-tuning which provide
the access point with the ability to auto-calculate parameters such as slot time, ACK time-
out and CTS time-out to maximize range.