User's Manual

TR-MX2

SYSTEM

FIRMWARE UPGRADES

From time to time Tranzeo will release new firmware to enhance the feature set or fix any bugs

discovered in the field. Use this section to accomplish firmware upgrades, backup and restore functions.

Note: On the TR-MX2, there are two Ethernet ports. It is highly recommended to use the Ethernet port

closest to the reset pin as the primary use port. This is the active port used to load new firmware from

power on state in the event a firmware recovery procedure is necessary. The other port would be

recommended port for daisy chaining.

Actions Tab – Flash new firmware image

Use this tab to find out current software version and update the device with the new firmware

Current Firmware: displays the version of the device firmware which is currently operating.

Choose File: activate Browse button to navigate to and select the new firmware file. The full path to

the new firmware file location can be specified there. New firmware file is transferred to the system

after Upload button is activated.

Flash image should be activated in order to proceed with firmware upgrade routine (new firmware