User's Manual

This mode is generally used for outdoor connections over long distances, or for indoor connections
between local networks.
Router Mode
In Router Mode, the device also operates as a router.
Either the wireless or Ethernet can be setup as WAN connection to a broadband modem. Wireless as
WAN is known as Client + Router mode (or Wireless Routing Client mode) and Ethernet as WAN is
known as AP + Router mode (or Gateway mode). Device supports both types of broadband
connections Static IP and dynamic IP. For setup details refer to the respective section.
The illustration below shows the Ethernet port is setup as the WAN port and the wireless connection as
the LAN.
Client + Router connection example
Wireless is use to connect to the broadband.
Ethernet is the local network (LAN)
sharing the broadband connection.