User's Manual

888
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 3: Configuration
3-8
TR-900 Series
Tranzeo Wireless Technologies
Administrative Settings
Use this window to upgrade the software, change your password, and define
SNMP parameters.
Upgrade Software:
Enter the location of the software update file or
Browse to locate it in your computer. Click Upgrade
Software. If the radio does not refresh the Information
Page after 1 minute, press Refresh, Reload or F5.
Verify the new firmware is installed correctly.
Defaults:
Returns all settings to factory defaults, including
passwords.
Reboot:
Restarts the system without changing settings.
Rollback:
To undo the most recent change.
Device Name:
It is the network name of the device. This name
appears in the Locator and on the Tranzeo stations list.
User Name:
This is the login username.
Password:
Enter a new password if you want to change it.
Confirm Password:
Re-type the new password.
Extended Wireless
Information:
Enables extended information (name and IP address),
which is only displayed with Tranzeo access points.
Signal/Status LEDs:
Un-check to turn off the LED panel indicators.
SNMP Parameters:
Here you set the Read Community string and
Contact/Location information. It’s highly
recommended that you change the Read Community
string immediately to prevent unauthorized scanning
of your network.