User's Manual

20155 Stewart Crescent,
Maple Ridge, B.C. Canada V2X 0T6
Phone (604) 460-6002 Fax (604) 460-6005
www.tranzeo.com
Revision 7/26/04 Build 51 Page 6 of 10
TRANZEO WIRELESS QUICK START GUIDE
Connect the Power Cable
Connect the power adapter to the power socket on the Power over Ethernet Adaptor, and plug the other end
of the power into an electrical outlet. Plug the RJ-45 Cable from the unit into the POE. The Station Adaptor
will be powered on and the Red power indicator on the top panel will turn on.
NOTE: ONLY use the power adapter supplied with the Access Point. Otherwise, the product may be
damaged.
To
PC
To CPE