User's Manual
20155 Stewart Crescent,
Maple Ridge, B.C. Canada V2X 0T6
Phone (604) 460-6002 Fax (604) 460-6005
www.tranzeo.com
Revision 7/26/04 Build 51 Page 2 of 10
TRANZEO WIRELESS QUICK START GUIDE
TR-CPE Quick Start Guide
Introduction
This next-generation wireless LAN device – the TRANZEO TR-CPE200, brings Ethernet-like performance to the
wireless realm. Fully compliant with the IEEE802.11b standard, the TRANZEO TR-CPE200 also provides powerful
features such as the Internet-based configuration utility, and WEP security. Maximize network efficiency while
minimizing your network investment and maintenance costs.
TR-CPE Quick Start Guide
Hardware Installation
Product Kit
Before installation, make sure that you have the following items:
The TR CPE200 x 1
DC Power Adapter x 1
Power over Ethernet Adapter x 1
Ethernet Boot x 1
Ethernet Boot Tightening Bracket x 1
Mounting Bracket x 1
Ket Nuts (With Washer Attached) x 8
U-Bolt w/ 2 Nuts x 1
RJ-45 Patch Cable x 1
Spare Ethernet Boot Gasket x 1
If any of the above items is not included or damaged, please contact your local dealer for support.
Mechanical Description
LED panel of the Wireless LAN Smart Access Point:
The following table provides an overview of each LED activity:
LED Definition Activity Description
Label Color Indicators
POWER Amber
On: Powered On
Off: No Power
LAN Amber/Green*
On: Ethernet Link
Flashing : Ethernet Traffic
Off: No Ethernet Link
Radio Red
On: Radio Link
Flashing Radio Activity
Off: No Radio Link
*Only one of the two colors will be shown. Actual color will vary between units.
Power Supply: ONLY use the power adapter supplied with the TR- CPE200. Otherwise, the product may be
damaged.