User's Manual

Unit 13 – 11720 Stewart Crescent,
Maple Ridge, B.C. Canada V2X 9E7
Phone [phone] Fax [phone]
www.tranzeo.com
Revision 5/1/2003 Page 9 of 20
Tranzeo TR-CPE
Quick Start Guide
Attaching the Mounting Bracket
Step 1
As shown below, the U-Bolt is designed to mount around a pole.
Tighten bolts sufficiently to prevent any movement.
Step 2
Down or up tilt can be adjusted by using the swinging the unit
before tightening the U-Bolt.
Connect the Power Cable
Connect the power adapter to the power socket on the Power over
Ethernet Adaptor, and plug the other end of the power into an
electrical outlet. Plug the RJ-45 Cable from the unit into the POE.
The TR-CPE will be powered on and all five indicators on the top
panel will flash in sequence to test the functionality of the indicators.
NOTE: ONLY use the power adapter supplied with the TR-CPE.
Otherwise, the product may be damaged.
Note 1: ONLY use the power adapter supplied with the TR-CPE.
Otherwise, the product may be damaged.