User's Manual
Unit 13 – 11720 Stewart Crescent,
Maple Ridge, B.C. Canada V2X 9E7
Phone (604) 460-6002 Fax (604) 460-6005
www.tranzeo.com
Revision 5/1/2003 Page 2 of 20
Tranzeo TR-CPE
Quick Start Guide
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: The Manufacturer is not responsible for any Radio or TV interference caused by una uthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
• This equipment has been tested and found to comply with the limits for a Class A digital devices
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
• This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communication.
• Operation of this equipment in residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at this own expense.
• The user should not modify or change this equipment without written approval from Tranzeo
Wireless.
• . Modification could void authority to use this equipment.
• For the safety reason, people should not work in a situation which RF Exposure limits be exceeded.
To prevent the situation happening, people who work with the antenna should be aware of the following
rules:
1. Install the antenna in a location where a distance of 20 cm from the antenna may be maintained.
2. While installing the antenna in the location, please do not turn on the power of wireless card.
3. While the device is working, please do not contact the antenna.
4. RF exposure: The antenna used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter”