User's Manual

Unit 13 – 11720 Stewart Crescent,
Maple Ridge, B.C. Canada V2X 9E7
Phone [phone] Fax [phone]
www.tranzeo.com
Revision 5/1/2003 Page 16 of 20
Tranzeo TR-CPE
Quick Start Guide
Firmware Upgrade Utility
When you finished the installation of the TR-CPE utility, you will find the Firmware upgrade utility in the
TR-CPE utility Programs Folder. When you start the Firmware upgrade utility, it will browse for all of the
TR-CPE’s available on the network.
Select the TR-CPE you want to upgrade. Enter the password and click the LOGIN button. You will be able
to upgrade Firmware of the TR-CPE utility as you desire.
Note: The default password to get access to the TR-CPE is “default”.
Upgrade
This item is used for uploading the newest firmware of the Access Point. You may either enter the file name
in the entry field or browse the file by clicking the Open File button.
After choose the correctly file, click the Upgrade button to make the Firmware upgrade take effect. For
information about the release of the newest firmware, check the Tranzeo website at http://www.tranzeo.com.