User's Manual

Unit 13 – 11720 Stewart Crescent,
Maple Ridge, B.C. Canada V2X 9E7
Phone [phone] Fax [phone]
www.tranzeo.com
Revision 5/1/2003 Page 13 of 20
Tranzeo TR-CPE
Quick Start Guide
WEP
To enable the WEP encryption, select the encryption type, either 40 bit or 128 bit, Key Format ASCII, Hex,
or Passphrase. Then enter a WEP Key in the EDIT Key field.
For 40 bit encryption you may choose:
n ASCII: 5 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g. MyKey)
n Hex: 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g. 11AA22BB33)
For 128 bit encryption you may choose:
n ASCII: 13 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g. MyKey12345678)
n Hex: 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g.
0011 2233445566778899AABBCC).
Create Encryption Keys by Using a Passphrase
Step 1. To create encryption keys by using a passphrase, select key format either 40 bit or 128 bit and enter
Passphrase.
Step 2. Type a character string in the Passphrase to generate key field, then click Generate . As you type, the
utility uses an algorithm to generate 4 keys automatically.
Step 3. Select one key from the Edit Key and click Apply button to make the setting take effect.