User's Manual

20155 Stewart Crescent,
Maple Ridge, B.C. Canada V2X 0T6
Phone [phone] Fax [phone]
www.tranzeo.com
Page 9 of 24 3/10/2005












Grounding the Antenna
Using a #6 Green grounding wire, connect the Grounding Lug on the radio to a proper ground. See APPENDIX
A Lighting Information for more information.
Connect the Power Cable
Connect the power adapter to the power socket on the
Power over Ethernet Adaptor, and plug the other end of
the power into an electrical outlet. Plug the RJ-45
Cable from the unit into the POE. The Station Adaptor
will be powered on and the power indicator on the top
panel will turn on.
NOTE: ONLY use the power adapter supplied with the
Access Point. Otherwise, the product may be damaged.
This unit must be grounded. Connect the green
Grounding cable to a known good earth ground, as
outlined in the National Electrical Code.
Dual Ethernet Ports
The TR-6000 has two Ethernet port available. Port A is used to connect to the radio in the radio in the case.
Port B is used to power and provide Ethernet connectivity to additional devices. This allows for the chaining of
multiple devices together.