User's Manual
20155 Stewart Crescent,
Maple Ridge, B.C. Canada V2X 0T6
Phone (604) 460-6002 Fax (604) 460-6005
www.tranzeo.com
Page 4 of 24 3/10/2005
Mechanical Description
LED panel of the Wireless LAN Smart Access Point:
The following table provides an overview of each LED activity:
LED Definition Activity Description
Label Color Indicators
POWER Red
On: Powered On
Off: No Power
LAN Green*
On: Ethernet Link
Flashing : Ethernet Traffic
Off: No Ethernet Link
Radio Amber
On: Radio Link
Flashing Radio Activity
Off: No Radio Link
Signal Red/Amber/Green
In CPE mode, light up in
sequence to indicate signal
strength
In AP mode the signal lights indicate the following:
Color Indicators
Red
On: WEP/128 Enabled
Flashing: WEP/64 Enabled
Off: WEP Off
Amber*
On: WPA/AES Enabled
Flashing : WPA/TKIP
Enabled
Off: WPA Off
Amber
Flashing: 2.4 GHz operation
Green
On: ACL Enabled
Off: ACL Off
Green
On: WDS Enabled
Off: WDS Off
Power Supply
ONLY use the power adapter supplied with the TR-6000. Otherwise, the product may be damaged.