User's Manual

18
Chapter 4 Troubleshooting
If you have trouble using the 11Mbps Wireless LAN Access Point, the starting point to
troubleshoot the problem with your Access Point is looking at the LED activity of the
Access Point. The following is “LED Error Table” provided to assist you in diagnosing
and solving operational problems.
TR- 1000 LED Activity Table
PWR AP WLAN LAN LINK DESCRPTION/ACTION
Continuous Flash Flash Steady Normal Activity
Green Green Green Green ?No Action Required
Continuous
Green No LAN Activity
On Off Off
–
?No Action Required
Off Off Off Off Off Power failure
?Check power chord/supply
Invalid loader Firmware
Off Off Off Off or micro-controller dead
?Return to Dealer for support
Invalid Access Point Firmware
Blink Green
– – – ?Upgrade firmware
Continuous
Green Wireless LAN initialization failure
Blink Green Blink Green
– – ?check whether the wireless
module has been properly installed
Ethernet initialization failure
Blink Green
–
Blink Green
–
? Return device to the vendor for
support