Quick Start Manual

Figure 16
For all information to enter into the boxes, contact your
network administrator.
4. Click the Specify an IP Address radio button.
a. Enter the IP address and the Subnet mask.
Figure 17
5. Click the Gateway tab
a. Enter the gateway.
b. Click the Add button.
Figure 18
6. Click the DNS Configuration tab.
a. Click the Enable DNS.
i. Enter the host.
ii. Enter the DNS into the box and click
Add.
iii. Enter the Domain ONLY if there is
one.
Figure 19
For Windows 2000 users:
1.
2.
Click the Start Button, then Settings, and then select
Network and Dial-up Connections.
Right click on the Network connection that will be in
the window and click properties.
Figure 20
3. Select the TCP/IP icon in the list and click properties.
Figure 21
6