User's Manual

777
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 3: Configuration
3-7
TR-FDD Series
Tranzeo Wireless Technologies
Administrative Settings
Use this window to upgrade the software, change your password, and define
SNMP parameters.
Upgrade Software:
Enter the location of the software update file or
Browse to locate it in your computer. Click Upgrade
Software. If the radio does not refresh the Information
Page after 1 minute, press Refresh, Reload or F5.
Verify the new firmware is installed correctly.
Defaults:
Returns all settings to factory defaults, including
passwords.
Reboot:
Restarts the system without changing settings.
Rollback:
To undo the most recent change.
Device Name:
It is the network name of the device. This name
appears in the Locator and on the Tranzeo stations list.
User Name:
This is the login username.
Password:
Enter a new password if you want to change it.
Confirm Password:
Re-type the new password.
Extended Wireless
Information:
Enables extended information (name and IP address),
which is only displayed with Tranzeo access points.
Signal/Status LEDs:
Un-check to turn off the LED panel indicators.
SNMP Parameters:
Here you set the Read Community string and
Contact/Location information. It‘s highly
recommended that you change the Read Community
string immediately to prevent unauthorized scanning
of your network.
You can also select the traffic counter format that you
would like to use.