User's Manual

666
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 2: Hardware Installation
2-6
TR-FDD Series
Tranzeo Wireless Technologies
Step 13:
Place the channel shield cover and channel
shield compression ring over the channel
shield as shown.
Step 14:
Attach and tighten the screws and nuts as
shown ensuring that the gasket is
compressed equally around the cover.
Step 15:
Attach the mounting bracket to the pole
using the U-bolt. Secure the U-bolt with
the lock washers and the nuts. Align if
necessary, and then tighten the nuts enough
to prevent any movement.
Step 16:
Fit the radio to the mounting bracket.
Secure the radio with kep nuts.
IMPORTANT! The strain relief must be
always facing the ground.
Mounting the Radio