User's Manual

EnRoute500 User’s Guide
TR0149 Rev. C5
96
> use sys
sys> set splash.auth.server.enable.wlan1=yes
The “Require Login” settings on the “Splash Pages” sub-tab under the “AAA” tab on the
“System Parameters” page (see
Figure 49) is used to configure this parameter via the web interface.
Figure 49. Splash page configuration
15.1.2 Configuring Splash URLs
The URL that a user is redirected to for login purposes can be individually configured for each
client interface that supports splash pages (wlan1-4). URLs for successful login, failed login,
and error conditions can also be specified for each interface.