User's Manual

EnRoute50x/51x User’s Guide
TR0153 Rev. D2
48
sys.organization.state – state name
sys.organization.country – two-letter country abbreviation
Web GUI
The certificate information can be set via the web interface using the “Location” tab on the
“System Parameters” page.
Figure 26. Setting certificate information
6.11 CLI timeout
The CLI will automatically log out a user if the interface has remained inactive for a certain
length of time. The time, in seconds, that a shell must remain inactive before a user is
automatically logged out is set with the „shell.timeout‟ parameter in the „sys‟ interface, as
shown in the example below. The maximum idle time that can be set is 21600 seconds (360
minutes).
> use sys
sys> set shell.timeout=300