User's Manual

EnRoute50x/51x User’s Guide
TR0153 Rev. D2
42
Web GUI
The mesh prefix can be set via the web interface using the “Mesh” tab on the “Wireless
Interfaces” page.
Figure 20. Setting the mesh prefix
6.5 LAN Prefix
A Class C subnet is shared between a EnRoute500‟s access point and Ethernet interfaces.
The subnet address space is based on the mesh ID, node ID, and LAN prefix. The suggested
values for the LAN prefix are 10 and 192. The LAN prefix must be the same for all nodes in a
mesh cluster.
Mesh ID Node ID
10 . 12 . 107 . 0
LAN prefix
Figure 21. Subnet address structure
By default the subnet is split between a node‟s interfaces as shown in Table 6. See sections
8.1.4 and 9.6.3 for instructions on how to adjust how the subnet is segmented between
interfaces.