User's Manual

EnRoute50x/51x User’s Guide
TR0153 Rev. D2
111
Figure 52. Adding trusted MAC addresses and accessible hosts
15.1.6 Bypass Splash Pages for Access to Specific Hosts
It is possible to specify a list of IP addresses that clients can access without the clients having
to view a splash screen.
CLI
The list of hosts that can be accessed without having to view a splash screen is set with the
„splash.bypass_hosts‟ parameter in the „sys‟ interface. The hosts are specified by their IP
addresses and must be separated by commas. An example of setting this parameter is shown
below.
> use sys
sys> set splash.bypass_hosts="1.1.1.1,2.2.2.2"
Web GUI
The IP addresses of hosts that can be accessed without having to view a splash screen can be
set on the “Advanced Splash Pages” sub-tab under the “AAA” tab on the “System Parameters”
page of the web interface (see Figure 52). The list of IP addresses of bypassed hosts is
displayed on this page. To delete an IP address from the list, click on the “Delete Host” button
next to the IP address.