User's Manual

EnRoute50x/51x User’s Guide
TR0153 Rev. D2
11
Power Ethernet
Figure 4. EnRoute500 interfaces. EnRoute501 shown
Interface
Description
Power (EnRoute 5x1 only)
Power input (100-240VAC 50-60 Hz)
Mesh radio port
N-type antenna connector for mesh radio
AP radio port
N-type antenna connector for access point radio
Ethernet
10/100 Mbit Ethernet interface
Passive PoE
PoE secondary power input (9-28VDC, 12W)
Not compatible with IEEE 802.3af
Table 2. EnRoute500 Interfaces
1.5.1 Ethernet and PoE
The EnRoute500 has a 10/100 Ethernet port that supports passive Power over Ethernet (PoE).
The PoE power injector should supply an input voltage between 9-28VDC and a minimum of
12W. The pinout for the Ethernet interface on the EnRoute500 is provided in Table 3.
AP radio
port
Mesh radio
port