User's Manual

EnRoute500 User’s Guide
TR0149 Rev. C5
83
address to the ACL for that access point. Once an address has been added, it will appear at
the bottom of the page. To delete a MAC address in an ACL, click on the “Delete MAC” button
next to the address.
The ACL for an access point must be enabled after it has been created. Choose “whitelist”
from the drop-down menu and click on “Change ACL Mode” to enable the list. Choose “none”
from the drop-down menu and click on “Change ACL Mode” to disable the use of the ACL for
the mesh interface.
Figure 42. Mesh ACL configuration