User's Manual

EnRoute500 User’s Guide
TR0149 Rev. C5
70
End address = <sys.id.lanprefix>.
<sys.id.mesh>.
<sys.id.node>.
<wlan1.ip.start.actual> - <wlanN.ip.size.actual> - 2
Figure 36. Access point DHCP configuration
The EnRoute500 can be configured to set aside a number of addresses for client devices that
will use a static address. These addresses are taken from the pool that DHCP assigns
addresses from. Thus, increasing the number of addresses set aside for devices with static IP
addresses will reduce the size of the DHCP address pool. The parameter ‘dhcp.reserve’
controls the number of addresses that will be reserved for static use. By default, this parameter
is set to zero, assigning the maximum possible number of addresses to the DHCP pool. You