User's Manual

EnRoute500 User’s Guide
TR0149 Rev. C5
23
2.5.10 ‘ifconfig’ command
Syntax
ifconfig <eth0|wlan[0-4]>
Description Displays information, such as IP address and MAC address, for a particular
network interface.
Example
ifconfig wlan1
will display
wlan1 Link encap:Ethernet HWaddr 00:15:6D:52:01:FD
inet addr:10.2.10.1 Bcast:172.29.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2434 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:233128 (227.6 Kb)
2.5.11 ‘route’ command
Syntax
route
Description Displays the current route table.
2.5.12 ‘clear’ command
Syntax
clear
Description Clears the screen