User's Manual

EnRoute500 User’s Guide
TR0149 Rev. C5
22
2.5.8 ‘list’ command
Syntax
list
Description Lists all parameters for the selected interface
Example With the ‘firewall’ interface selected
list
will display
firewall.gateway.enable : prevent uninitiated in
coming connections
past the gateway?
firewall.node.allowc2c.eth0 : allow clients to see each other if
.role=access
firewall.node.allowc2c.wlan1 : allow clients to see each other if
.role=access
firewall.node.allowc2c.wlan2 : allow clients to see each ot
her if
.role=access
firewall.node.allowc2c.wlan3 : allow clients to see each other if
.role=access
firewall.node.allowc2c.wlan4 : allow clients to see each other if
.role=access
firewall.node.enable : firewall enabled? if not, nothing else
here matters.
firewall.node.tcp.allow.dest : tcp dest ports (space separated)
to allow to this node
firewall.node.tcp.allow.source : tcp source ports (space
separated) to allow to this node
firewall.node.udp.allow.dest : udp dest ports (space separated)
to allow to this node
firewall.node.udp.allow.source : udp source ports (space
separated) to allow to this node
2.5.9 ‘ping’ command
Syntax
ping <IP address or hostname>
Description Pings a remote network device. Halt pinging with Ctrl+C
Example
ping 172.29.1.1