User's Manual

EnRoute500 User’s Guide
TR0149 Rev. C5
21
2.5.7 ‘get’ command
Syntax
get <parameter>
where <parameter> is the parameter whose value is being fetched
Description Gets the value of one or more configuration parameters for the currently
selected interface. The ‘*’ character can be used to specify wildcard
characters. This allows multiple values to be fetched with a single
command.
Example With the ‘sys’ interface selected
get id.node
will return the node’s ID, while
get id.*
will return all parameters that begin with ‘id.’
sys.id.lanprefix = 10
sys.id.mesh = 4
sys.id.meshprefix = 172.29
sys.id.node = 7