User's Manual

53
Compliance Information
This device has been designed to operate with the antennas having a maximum gain of
32 dB. Antennas not included in this list or having a gain greater than 32 dB are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms.
5 GHz Antennas
 TR-5.8-32DB-ANT - 32 dBi Dish Antenna
 TR-GD58-26 - 26 dBi Grid Antenna
This device has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC rules, and Industry Canada requirements.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful communication.
This device must be installed so that there is a minimum of 139 cm between the
antenna and any person.
Professional Installation Required
This product must be professionally installed and configured in accordance with local
regulations and safety codes.
Geographical Restrictions
This product is intended to be used in the following countries:
 North America
 South America
 Australia
 Africa
The following restrictions apply to the use of this product:
 This device may not be used in a geographical location that requires the use of Dynamic
Frequency Selection unless approved by the local authorities.
 The user of this product must ensure that it complies with the EIRP limits specified by
local regulations.