User's Manual

45
A Factory Default Configuration Settings
This appendix lists the factory default configuration settings that are in effect when you
unpack the TR-WMX-5.8 or reset it to factory default settings.
A.1 Default Wireless Settings
Setting Default Setting Default
Channel Bandwidth (MHz) 3.5 QoS Max Downlink SF 8
Secondary Management
Connection Support
Secondary Management
(Default)
Initial Ranging Burst Inverting Software Auto AFS channel bandwidth (in
MHz) scan order
35-7-0
Adaptive Modulation (DBPC) Auto using CINR thresholds For Least Robust DIUC as
LSB/MSB and DCD CCC as
MSB/LSB
Enable
Frequency (KHz) 5725000 MAC Message Strict
Checking
Disable
Initial Delay Correction Value 0 Pack Enable For Primary
CID
Enable
Max TX Power (dBm) 20 Fragment Enable For
Primary CID
Enable
Min TX Power (dBm) -10 TX overrun fix Disable
RX Antenna Gain (1/4dB
step)
0 QoS Admitted Bit Disable
TX Antenna Gain (1/4dB
step)
0 QoS Tx Policy Checking Disable
MRTR for SMC in bps 100000 Enable 0 symbol HFDD
Patch
Disable
Lost DL/UL MAP Interval 700 AFS mode Disable
A