User's Manual

System Information Page

TR-WMX-5.8 Outdoor Subscriber Unit User's Guide

Table 3-3. System Information Page

Field Description

Bridge br0 IP Address Wired IP address of the TR-WMX-5.8, as defined on the TCP/IP Settings page (see section 2.3.1).

Bridge br0 Net Mask Wired netmask of the TR-WMX-5.8, as defined on the TCP/IP Settings page (see section 2.3.1).

Encryption Support Shows whether encryption is enabled or disabled on the TR-WMX-5.8, as defined on the Security

Settings page (see section 2.2.2).

PKM Mode Shows whether private key management is enabled or disabled on the TR-WMX-5.8, as defined on

the Security Settings page (see section 2.2.2).

Secondary Management

Connection Support

Shows whether the secondary management support has been enabled.

IP Managed Mode Shows whether an IP address has been assigned to the CPE using DHCP operating over the IEEE

802.16 secondary management channel.

Bridge/Router Mode Shows whether the TR-WMX-5.8 is configured for bridge or router mode, as defined on the TCP/IP

Settings page (see section 2.3.1).

IP Mode Shows whether IP mode is set to static or DHCP setting, as defined on the TCP/IP Settings page

(see section 2.3.1).

MAC Msg Strict Checking Shows whether MAC Message Strict Checking is enabled or disabled, as defined on the Wireless

Settings page (see section 2.2.1).

Pack Enable For Primary

CID

Shows whether Pack Enable for Primary CID is enabled or disabled, as defined on the Wireless

Settings page (see section 2.2.1).

Fragment Enable For

Primary CID

Shows whether Fragment Enable For Primary CID is enabled or disabled, as defined on the

Wireless Settings page (see section 2.2.1).

TX Overrun Fix Shows whether TX Overrun Fix is enabled or disabled, as defined on the Wireless Settings page

(see section 2.2.1).

Bypass QoS Admitted Bit

(Absent)

Shows whether Bypass QoS Admitted Bit (Absent) is enabled or disabled.

Bypass Strict QoS Tx

Policy Checking

Shows whether Bypass Strict QoS Tx Policy Checking is enabled or disabled.

Enable 0 Symbol HFDD

Patch

Shows whether Enable 0 Symbol HFDD Patch is enabled or disabled, as defined on the Wireless

Settings page (see section 2.2.1).

Base Station ID List Shows the base station ID list, as defined on the Wireless Settings page (see section 2.2.1).