User's Manual

Chapter 2, Advanced Configuration
26 TR-WMX-5.8 Outdoor Subscriber Unit User's Guide
Set Specific VLAN Rules (continued)
Field Description
Source IP Range The range of source IP addresses to which the rule applies and corresponding mask.
Destination IP Range The range of destination IP addresses to which the rule applies and corresponding mask.
Source Port Range The range of source ports to which the rule applies and corresponding mask.
Destination Port Range The range of destination ports to which the rule applies and corresponding mask.
Button Description
New Click this button to set up a new rule for the management VLAN. After clicking this button,
complete the Set Specific VLAN Rules section on this page and click Add. The new rule
appears under VLAN Rules at the bottom of this page.
Add After setting up a new rule, click this button to add the rule to the VLAN Rules list at the
bottom of the page.
Delete Lets you delete a rule. In the VLAN Rule ID field, enter the ID for the rule you want to delete.
Then click Delete to delete the rule.
Note: No precautionary message appears before deleting a rule, so be sure you do not need
the rule before you delete it.
Edit Lets you modify a rule. In the VLAN Rule ID field, enter the ID for the rule you want to edit.
Then click Edit, change the settings, and click Update.
Update Click this button after editing a rule.