User's Manual

49
A Factory Default Configuration Settings
This appendix lists the factory default configuration settings that are in effect when you
unpack the TR-WMX-3.5 or reset it to factory default settings.
A.1 Default Wireless Settings
Setting Default Setting Default
Channel Bandwidth (MHz) 3.5 QoS Max Downlink SF 8
RF Profiles TDD QoS Max Uplink SF 8
CP Size 1/16 AFS channel bandwidth (in
MHz) scan order
35-7-0
Secondary Management
Connection Support
Secondary Management
(Default)
For Least Robust DIUC as
LSB/MSB and DCD CCC as
MSB/LSB
Enable
Initial Ranging Burst Inverting Software Auto MAC Message Strict
Checking
Disable
Adaptive Modulation (DBPC) Auto using CINR thresholds Pack Enable For Primary
CID
Enable
Frequency (KHz) 3650000 Fragment Enable For
Primary CID
Enable
Initial Delay Correction Value 0 TX overrun fix Disable
Max TX Power (dBm) 20 QoS Admitted Bit Disable
Min TX Power (dBm) -10 QoS Tx Policy Checking Disable
RX Antenna Gain (1/4dB
step)
0 Enable 0 symbol HFDD
Patch
Disable
TX Antenna Gain (1/4dB
step)
0 AFS mode Disable
MRTR for SMC in bps 100000 CS classifier rules' type
check bypass
Disable
Lost DL/UL MAP Interval 700
A