User's Manual

Configuring the TR-WMX-3.5
TR-WMX-3.5 Subscriber Unit User's Guide
11
Figure 1-7. Wireless Settings Page
Table 1-2. Wireless Settings
Parameter Choose This Setting
Group ∂ Parameters in Figure 1-7
Channel Bandwidth (MHz) Select 3.5MHz (default) or 7MHz, whichever best suits your
application’s bandwidth needs and is allowed by your license.
The base station must be set to the same bandwidth.
RF Profiles Confirm that the default setting (TDD) is selected.
CP Size Sets the cyclic prefix size, which helps mitigate multipath-
induced signal degradation. Choices are 1/4, 1/8, 1/16
(default), or 1/32. This setting should match the CP setting of
the base station to which the device is connecting.
∂
•
•
÷