User's Manual

Preface
TR-WMX-2.X Subscriber Unit User's Guide
iv
TR-WMX-2.X Features
The TR-WMX-2.X is designed for quick installation. The following list summarizes the key
features of the TR-WMX-2.X.
 Complies with IEEE 802.16-2004 for communication with WiMAX base stations that
support this standard.
 Supports multiple duplex modes and channel bandwidths.
 Power-over-Ethernet (PoE) capabilities allow data and power to be supplied to the unit
using a single Ethernet cable.
 Includes an external or embedded antenna.
 External signal strength LEDs allow the antenna to be aligned for optimal received signal
strength from the base station, without having to use a computer to log in to the unit.
Summary of Chapters
This guide contains the following chapters.
 Chapter 1, Basic Installation includes instructions for getting the TR-WMX-2.X WiMAX
Subscriber Unit up and running as quickly as possible.
 Chapter 2, Advanced Configuration describes how to perform advanced configuration
activities using the Web-based Configurator.
 Chapter 3, Viewing Status Information describes how to use the Configurator to
view/change status information about TR-WMX-2.X.
 Chapter 4, Configuring Administrative Settings describes how to use the Configurator
to view change the device name and location; enable or disable Web, SSH, and Telnet
access to the TR-WMX-2.X; enable or disable the TR-WMX-2.X status LEDs; and change
the user name and password for logging in to the Configurator.
 Appendix A, Factory Default Configuration Settings lists the factory default
configuration settings for the TR-WMX-2.X.
 Appendix B, Upgrading Firmware describes how to upgrade the TR-WMX-2.X firmware.
Release Notes
The Release Notes provided with your TR-WMX-2.X contain information that may not
have been available when this User’s Guide was written. We recommend you read the
Release Notes before installing and configuring your TR-WMX-2.X.