User's Manual

Chapter 3: Using the Web Interface
TR0153 Rev. E1 20
A configuration overview page is loaded by default after the login process has been completed.
This page contains the following information
• Firmware version and list of installed patches
• System uptime
• System mode of operation (gateway or repeater)
• Mesh channel and ESSID
• IP addresses, netmask, and MAC addresses for each client access interface
• Status, channel, ESSID, and encryption type for each virtual access point interface
• VLAN status and ID for all interfaces
• Ethernet interface use (client access or backhaul)
To access the status page from any other page in the web interface, click on the “Status” link
in the navigation bar that appears on the left side of the web interface.
Figure 7. Configuration overview page displayed when logging in