User's Manual

Chapter 1: Working with the ER-1000
TR0190 Rev. A1 9
Ethernet
Figure 1. TR-900 interfaces.
Interface Description
AP radio port N-type antenna connector for access point radio
Ethernet 10/100 Mbit Ethernet interface
Passive PoE
PoE power input (9-28VDC, 12W)
Not compatible with IEEE 802.3af
Table 2. TR-900 Interfaces
1.2.1 Ethernet and PoE
The TR-900 has a 10/100 Ethernet port that supports passive Power over Ethernet (PoE). The
PoE power injector should supply an input voltage between 9-28VDC and a minimum of 12W.
The pinout for the Ethernet interface on the TR-900 is provided in Table 3.
The TR-900 is equipped with an auto-sensing Ethernet port that allows both regular
and cross-over cables to be used to connect to it.
AP
radio
port