User's Manual
Table Of Contents
- Mechanical Description
- Hardware Installation
- Connecting the Ethernet Cable
- Step 1
- Step 2
- Step 3
- Step 4
- 
- Step 5
- Step 7
- Step 8
- Attaching the Mounting Bracket
- Grounding the Antenna
- Connect the Power Cable
- Dual Ethernet Ports
- HTML Interface
- Passwords
- Information
- Wireless Settings
- Image File Name
- Enabled
- Enabled
- Enable Access Control
- QOS
- Why is coiling the LMR or CAT5 bad?
- What standard does Tranzeo Wireless equipment meet?
- Is lightning damaged covered by the Warranty?
- Where to Ground the device
- Ungrounded Radio
- Grounded Radio
- Best Practices
Connect the Power Cable
Dual Ethernet Ports
The TR-49 has two Ethernet port available. Port A is used to connect to the radio in the radio in the
case. Port B is used to power and provide Ethernet connectivity to additional devices. This allows
for the daisy chaining of multiple devices together.
Connect the power adapter to the power
socket on the Power over Ethernet Adaptor
(POE), and plug the other end of the power
into an electrical outlet. Plug the RJ-45 Ca-
ble from the unit into the POE. The Station
Adaptor will be powered on and the power
indicator on the top panel will turn on.
NOTE: ONLY use the power adapter sup-
plied with the Access Point. Otherwise, the
product may be damaged.
This unit must be grounded. Connect the
Green Grounding Cable to a known good
earth ground, as outlined in the National
Electrical Code.