User's Manual
Table Of Contents
- Mechanical Description
- Hardware Installation
- Connecting the Ethernet Cable
- Step 1
- Step 2
- Step 3
- Step 4
- 
- Step 5
- Step 7
- Step 8
- Attaching the Mounting Bracket
- Grounding the Antenna
- Connect the Power Cable
- Dual Ethernet Ports
- HTML Interface
- Passwords
- Information
- Wireless Settings
- Image File Name
- Enabled
- Enabled
- Enable Access Control
- QOS
- Why is coiling the LMR or CAT5 bad?
- What standard does Tranzeo Wireless equipment meet?
- Is lightning damaged covered by the Warranty?
- Where to Ground the device
- Ungrounded Radio
- Grounded Radio
- Best Practices
Cloning MAC
This is a new feature. It allows the CPE the clone the MAC of the device behind it. This feature can be useful
when dealing wth some PPPoE and Radius Implimentations. When the device is in Cloning MAC mode, it can
only be managed from the LAN side of the device.
Port Management
Port Forwarding
This is a new feature. It allows the radio to forward requests for certain ports to devices behind the router. For
example, the customer has a webserver behind the Radio on a Private Ip that they want to have accessable to the
world, then you can port forward all requests on Port 80 to 192.168.1.2.
Note: In order for this example to work, the management port of the radio would have to changed from port 80 on
the Network Configuration screen.
80
80
192.168.1.2