User's Manual
Table Of Contents
- Mechanical Description
- Hardware Installation
- Connecting the Ethernet Cable
- Step 1
- Step 2
- Step 3
- Step 4
- 
- Step 5
- Step 7
- Step 8
- Attaching the Mounting Bracket
- Grounding the Antenna
- Connect the Power Cable
- Dual Ethernet Ports
- HTML Interface
- Passwords
- Information
- Wireless Settings
- Image File Name
- Enabled
- Enabled
- Enable Access Control
- QOS
- Why is coiling the LMR or CAT5 bad?
- What standard does Tranzeo Wireless equipment meet?
- Is lightning damaged covered by the Warranty?
- Where to Ground the device
- Ungrounded Radio
- Grounded Radio
- Best Practices
Security Settings—Basic
Security Settings—Advanced
Enabled
Turn On WEP
Authentication
Select Open or Shared Key
Authentication
Key Length
Level of Encryption. NOTE: 64 bit is
referred to as 40 bit on some systems
Default Key
Choose the default WEP key
Activate Keys
Enter your WEP keys. NOTE: Keys must
be entered in HEX only.
Enabled
Turn On WPA
Cipher Type
Select the Level of Encryption.
TKIP or AES
PSK
Enter your password
Update Interval
Enter the update interval
Enabled
Turn on 802.1x RADIUS Server Au-
thentication
RADIUS Server IP Address
Enter the server IP
Timeout (min)
Enter the timeout period
RADIUS Server Shared Secret
Enter the name of the server
Server Port
Enter the port of the server