User's Manual

This document is intended for Public Distribution 19473 Fraser Way
Pitt Meadows, B.C. Canada V3Y 2V4
Phone [phone] Fax [phone]
24 www.tranzeo.com
1/10/2006
QUICK START GUIDE – TR-6000 SERIES
Select Refresh Rate
Each radio button represents a Refresh Rate. Many browsers do not allow infinite refreshes of a page through scripts,
so this page may stop updating. If it does, simply change the Refresh rate to another value to restart the process.
Associated Access Point
Information about the access point is displayed here. Some items will only be displayed if the Access Point is a
Tranzeo TR-6000 series series AP with the Extended Info turned on in the Administrative Settings Window.
Receiving
This box displays the current signal and the Lowest and Highest values. For the most accurate readings, data must be
transmitted through the unit.
Transmission
This box displays the current signal traffic breakdown. For the most accurate readings, data must be transmitted
through the unit. Beacons are always transmitted at the lowest possible rate. This screen only shows the values dur-
ing the refresh rate. For more detailed statistics so the Statistics screen
System
This box displays the current Memory usage. It will fluctuate during normal usage. This data is mainly for the use of
Tranzeo Wireless Technical Support.
System Performance (CPE and PxP Modes only)