User's Manual

141414
This document is intended for Public Distributio n
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 3: Configuration
3-14 TR-Multi Series
Tranzeo Wireless Technologies
Network Configuration
In this window you can control the network configuration of the device. First, you
must define if your radio will operate as a bridge or router. The content of the
window varies slightly depending on your selection.
When changing modes, the radio may need to reboot before certain features
become available.
The following are features common to bridge or router mode. Router specific
features are described in the next page.
Cloning Mac Address: This feature allows the radio to copy the Mac address
of the device you have connected to the network. This
is useful when you change your device and don’t want
to register a new Mac address, or when dealing with
some PPPoE and Radius implementations. When the
device is cloning a Mac address, it can only be
managed from the LAN side. T o clone a Mac address,
check the Mac Address box and enter the Mac
address in the field Cloning into. Uncheck to restore
the original Mac address.
IP Mode: You can select to use Static IP, DHCP Client
(dynamic), or PPPoE (available only for router).
Note: If a DHCP server is not available, the device
will try to get an IP for up to 5 minutes. After that, it
will fall back to a static IP.
WAN: Enter the information related to the WAN interface: IP
Address, Subnet Mask, Gateway, DNS1, DNS2, and
Domain Name.
Ethernet Port Speed: Set as Auto by default.
Router Bridge