User's Manual

3
How to use the waterproof tape
After connecting the plug of the power
adapter to the Power In socket of the
camera, use the provided waterproof
tape to protect it from moisture and
dirt .
1. Remove the release liner and wrap
the waterproof tape around the
plug and socketin a spiral. Wrap
the tape with enough tension to
obtain conformability on the surface.
2. Overlap by at least half the width of the tape so it bonds to itself,
while removing the release liner.
4.3 Fine Tuning
1. Adjust the camera's viewing angle
according to the illustrations.
2. Rotate the camera to make
adjustments.
3. When satisfied with the picture
coverage, retighten the screw.
5. Receiver Setup
There are 2 CD disks in the package, Disk 1: USB driver software / Skype
resident program software, Disk 2: AP monitoring software.
Please follow the steps below to setup USB receiver.
ENGLISH
Cable Entry Hole
Release Liner
Waterproof Tape