User's Manual

2
Pentium-IV 1.6GHz or higher (recommended)
256 MB RAM of system memory or higher (recommended)
One available USB port (preferably USB2.0)
Graphics Card (Must support DirectX 9.0c)
Sound Card (AC97 compatible sound card)
1GB Free HD Space
CD-ROM Drive (For software installation)
4. Camera Setup
4.1 Positioning the Camera
1. Fix the camera to the wall or ceiling using the masonry plugs and fixing
screws supplied.
2. Select a suitable location to drill a cable entry hole.Depending on the
location, this can be through the house wall or a door or
window frame.
4.2 Power Supply
1. Connect the plug of the power adapter with the Power In socket
of the cable from the camera.
Make sure power plug is pushed all the way in.
2. Plug the AC adapter into a wall outlet.
ENGLISH