User Manual
16
There is a Power and Warning Range (Far, Normal and Near) switch
on the lateral side of the Parent unit. When the switch is turned to
), it indicates the warning range is set at 5~10m. When the switch is
turned to )), it’s 8~20m. When the switch is turned to ))), it indicates
the warning range is set at the farthest, i.e. 15~30m. The user can set
the distance of the warning range based on the environment and re-
quirement. When the distance between the Child unit and the Parent unit
is within the warning range, the channel LED will light red or green. When the distance
between the Child unit and the Parent unit is out of the warning range, the channel LED
willashredorgreenandthebuzzeroftheParentunitwillbeepasawarning.Atthismo-
ment, you can press Find button
or channel selection button
Using the Child Tracker
)
5~10m
) )
8~20m
) ) )
15~30m
channel
3
LED
B
e
B
e
B
e
channel
1
LED
35m
to turn off the buzzer. Then press
channel selection button again
to select the desired channel
of the direction to monitor.
Warning range setup