User Manual

13
Using the Child Tracker
Adding Child units
When you want to add more Child units to the Parent unit, hold both
the Find button /initiation child unit button of the Parent unit and the
desired Find button/ initiation child unit button of the Child unit for 8
seconds. Then the buzzers of both Parent and Child units will beep
to inform you the Child unit is added. The channel of newly added
Child unit will automatically be set at the lowest channel that hasn’t
been set.
Removing Child units
When you want to remove any Child units from the Parent unit, please
hold the channel selection button/deletion child unit button for 8 seconds.
Then the buzzer of the Parent unit will beep to inform you the Child
unit is removed. Please note that when you complete removing, the
Child unit and the Parent unit can not be connected. If you want to
connect them, please repeat the steps described in Adding Child
Units. to connect them, please repeat the steps described in Adding
Child Units.
B
e
channel 2 LED
B
e
channel 2 LED