User Manual

12
Using the Child Tracker
channel 1 LED
B
e
B
e
B
e
channel 3 LED
35m
b. When there are several Child units:
If the Parent unit is corresponding to several Child units, you can press channel selection
button to select the Child unit you want to monitor. When the selected Child unit is
within the warning range, the channel LED will light red. When the selected Child
unitisoutofthewarningrange,thechannelLEDwillashred.OtherchannelLEDs
oftheParentunitcorrespondingtoconguredChildunitswilllightgreenwhen
the Child units are within the warning range. When the Child units are out of the
warningrangebutwithinthemonitoringrange,theLEDwillashgreen.Whenthe
Child units are out of valid monitoring range, the channel LED will go out.