2.4 GHz Digital Wireless USB Camera User's Manual Preliminary Version 2.
.4 GHz Digital Wireless USB Camera Contents 1 Package Content 2 Product Layout USB Receiver Camera 3 PC System Requirements 4 Camera Setup 4.1 Power Supply 4.2 Fine Tuning 4.3 Night Light / Night Vision 5 Receiver Setup 5.1 Windows Detect & Install New Device 5.2 Driver Installation 5.3 Skype Resident Program Installation 5.4 Monitoring Software 5.
ENGLISH 1. Package Content One Camera One USB Receiver One Power Adapter CD-ROM This User's Manual 2. Product Layout 1 USB Receiver 1. Antenna 2. Camera indicator LEDs 3. Camera switch 4 2 3 / Pairing button* 4. USB plug Note: For Pairing, see section 5.5 1 2 Camera 6 Lig ht 1. Antenna 3 2. Power indicator LED 4 3. Infrared LEDs 4. Lens 5. Supporting stand 6. Night-light / IR control MIC 5 / pairing button 7. Night-light 8. Microphone 9.
ENGLISH Pentium-IV 1.6GHz or higher (recommended) 256 MB RAM of system memory or higher (recommended) One available USB port (preferably USB2.0) Graphics Card (Must support DirectX 9.0c) Sound Card (AC97 compatible sound card) 1GB Free HD Space CD-ROM Drive (For software installation) 4. Camera Setup 4.1 Power Supply The camera uses either 4 AAA-Size batteries (alkaline battery recommended) or the household AC power current. Loading the Batteries 1.
ENGLISH Using AC Power 1. Plug one end of the provided power 3 adapter into a wall outlet and the other end into the bottom of the camera. Note: Use the adapter labeled ON OUTPUT: 6V DC with the OFF camera. 2 1 2. Slide the ON/OFF switch to the ON position. The LED on the camera will light up (red light). 4.2 Fine Tuning Place the camera in a convenient location, point the lens towards the observation area and adjust the angle by rotating the lens head. 4.
ENGLISH 5.1 Windows detect & install new device Make sure the OS of PC is Windows XP and the version is above (or equal) SP2. (Windows Vista is allowable). 1. Insert the USB Receiver into one USB port of PC and the "Found New Hardware wizard" screen will appear. Note: If the device has been searched and the screen isn't showed, please follow 5.2-2. 2. Choose "Install the software auto Driver Installation matically(Recommended)" in this screen and click "Next".
ENGLISH 5.3 Skype resident program installation (Disk 1) You can watch senior citizen or disabled people through Skype from remote location. 1. Please download and setup Skype software from www.skype.com (free software). 2. Insert the provided CD-ROM into your CD-ROM drive of PC and access to D:\RemoteMonitor-Skype\ (Where D is the letter of your CD-ROM drive). 3. Double-click the execution file named "rm_e_s.exe" and the "Welcome to the Remote Monitoring Setup Wizard" screen will appear. 4.
ENGLISH 6. Details on the Skype Resident Program Installation 6.1 Permit remote monitoring program to access Skype At the first launch of Remote Monitoring program, Skype displays a pop-up message asking allow Remote Monitoring program to access Skype. Please click Allow access button to permit Remote Monitoring program to connect to Skype. In case if you click Deny access button, or forgot to click Allow access button, you can enable Remote Monitoring program to access Skype by following steps below. 1.
ENGLISH 3. In the Manage API Access Control dialog box, find program name "SWatch.exe". If the program's state is "Not allowed to use Skype", click Change button. 4. In the dialog box, select the option "Allow this program to use Skype ", and then click OK button to close the dialog box. 5. Click Save button to close the Options dialog box and confirm the setting change. 6.
ENGLISH 1. Enable automatic-answering Skype incoming calls and start Skype video sending Check the option to enable the function of Remote Monitoring. Remote Monitoring program will auto-answer Skype calls and ask for a password to start sending Skype video. 2. Incoming call ringing period before asking password Specify the time length to wait to answer an incoming call. The waiting length can be from 0 to 30 seconds. 3.
ENGLISH 2. Run Skype program and the Remote Monitoring program. 3. Enable the remote monitoring function of Remote Monitoring program. Watch camera video remotely 1. Make a Skype call to the name that hosts the Skype on the computer with camera monitoring the security area. 2. After several ringing, the call will be answered with a chat message asking for a password. 3. If the password you enter is not correct, a chat message will ask you to enter password again. 4.
ENGLISH The following table lists the available commands and their descriptions. Command CAM1 Description Display the video of camera 1 CAM2 Display the video of camera 2 CAM3 Display the video of camera 3 CAM4 Display the video of camera 4 The following table lists the available commands are for indoor camera only. LED ON* Turn on the infra-red light LED OFF* Turn off the infra-red light LED AUTO* Set the infra-red light to auto-mode.
ENGLISH 8. Care and Maintenance Keep all parts and accessories out of children's reach. Fingerprints or dirt on the lens surface can adversely affect camera performances. Avoid touching the lens surface with your fingers. Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to wipe off the lens. Keep the camera dry. Precipitation, humidity, and other liquids contain minerals will corrode electronic circuits. Do not use or store in dusty, dirty areas.
