User's Manual

2.Package Contents4.Setup Guide
1. Connect one end of the RCA cable
(or scart cable) to the RCA jacks,
and connect the other end to a
source device as well.
2. Connect the DC plug of the adapter
to the DC jack, and connect the power
supply to an outlet.
3. Keep the IR window oriented toward
the source AV equipment, or
alternatively use the IR Mouse to remotely
control it.
2.Package Contents
Not e:Mak e su re the ON/OFF swi tch is in the OFF pos ition bef ore conne ct ion「 」
Transmitter
IR Mouse
Transmitter
To enjoy a life of wireless video and audio, just connect the
transmitter to whatever A/V source you like and connect the
receiver to a TV, monitor or speaker in another location.
4
OUT
Receiver
1. Connect one end of the RCA cable
(or scart cable) to the RCA jacks,
and connect the other end to a
TV (or monitor, speakers) on which
you like to enjoy a program.
2. Connect the DC plug of the adapter
to the DC jack, and connect the power
supply to an outlet.
3. Keep the IR window oriented toward
your remote controller.
Remote
Controller
Receiver
IN
* A complete set-up procedure consists of:
1. Press “CH” button on receiver, receiver
will make transmitter switch to the same
channel.
2. Make sure the ID on transmitter and receiver
is identical (For example, as exhibit
Transmitter: Receiver: )
whenever there is problem with installation, please implement the set-up
procedure again.
1 2 3
ON
ID 1
1 2 3
ON
ID 1
To AV Equipment
To TV