1.Important Safety iii 1 2.Package Content... rr erase 2 3.Panel Control And Function... 3 meetup GUI... viii rea 4 nutrient Transmitter/Receiver for optimal 1.Important Safety Information To prevent fire or shock hazard, do not expose this product to rain and moisture. For example: do not use near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or nearby a swimming pool. To avoid electric shock, do not take apart this product, provided as an accessory.
2.Package Contents Check to make sure that all units shown as below are enclosed. If something missed, please contact your dealer. 1. 5.8GHz Transmitter X 1 2.5.8GHz Receiver X 1 3. IR Mouse X 1/ fasten strips X 2 4. Power Adaplers(120V)X 2 5.
3.Panel Control and Function Transmitter/Receiver Fou ยง 5k) 10s] Be) ie ; 123 Hl 123 Hl i123 a 123 Ihe 11h ! 11123), [123], [923], [123], | Del | Awe) | Dae) | Be .UHF Antenna . ON/OFF Switch . Power Indicator/IR Windows . IR Mouse Jack (Transmitter Only) . Power Adapter Jack . Channel Selection Switch(Select the channel by sliding the dip switch to the channel number you want.
4.Setup Guide To enjoy a life of wireless video and audio, just connect the transmitter to whatever A/V source you like and connect the receiver to a TV, monitor or speaker in another location. Transmitter 0) 1. Connect one end of the RCA cable {or scary cable) to the audio and ideology jacks, and connect the other end ica 7 Ty source device as well. : Transmitter 2. Connect the DC plug of the adapter we to the DC jack, and connect the power supply to an outlet. I 3.
nutrient Transmitter/Receiver for optimal performance For optimal performance, both the audio/video and remote control antennas should be carefully oriented as described below. For maximum transmitting range, try to minimize obstacles (e.g. your TV or other electronics, large furniture) where between the transmitter and receiver. Orients the 5.8GHz A/V Antennas The system delivers high-quality 5.8GHzAntenna 5.
Orients the UHF Antennas In order to obtain optimal performance of the remote control extender, the remote control antennas should also be oriented at aright angle to an imaginary line drawn between the transmitter and receiver. If your remote control extender is not working satisfactorily, rotate the remote control antenna on either the transmitter or receiver 90 degrees so that iris still perpendicular to the path between the Fig.3) iF you notice improved performance, keep this orientation.
