'TRAN Smart Wireless Video STN GIGO 2020 Layout Gigabit 2020 = For Your Safety fern n= If you have any reason to suspect that interference is taking place, turn off the Gigabit 2020 2.4 GHz Wireless Audio/Video Sender 2" OUR tender Remote Control Orienting Antennas Auto-Sequence Function Troubleshooting Accessories Use only approved accessories, Do not connect incompatible products. Connecting to Other Devices When connecting to any other device, read its user's guide for detailed safety instructions.
Features Welcome to the world of smart wireless video with Tran's Brigadier series products. The Gigabit 2020 uses the latest in wireless communication technology to deliver audio and video from one place to another up to 300 feet away.
EEE EEE EEE ERT EAR TRA III" Gigabit 2020 Layout Front View of Transmitter (Gigabit 207) —— 2.4GHz Audio/Video Antenna (Front) Transmits audio/video signals. Remote Control Window Two LED in the window: Power Indicator LED (Left Side) The LED should be lit when the ON/OFF switch is in the ON position. IR Indicator LED (Right Side) The LED should be blinking when receiving an [R signal. Caution: Antenna does not rotate Freely 360 degrees.
See Gigabit 2020 Layout Front View of Receiver (Gigabit 20R) Remote Control Window Infrared passes through this to remotely control audio/video component, Two LED in the window: Power Indicator LED (Left Side) The LED should be lit when the ON/OFF switch is in the ON position. IR Indicator LED (Right Side) The LED should be blinking when receiving an IR signal. 2.4GHz Audio/Video Antenna (Front) Receives audio/video signals. Caution: Antenna does not rotate Freely 360 degrees.
Setting Up Your Gigabit 2020 Before you make the connection: ¢ Always make sure the unit ON/OFF switch is in the OFF position. ¢ Set the channel switches on the back of the transmitter and receiver to the same channel. Note: The transmitter has a single sliding channel switch. Select the channel by sliding the slide switch to the channel number you want. The channel switches on the receiver are dip switches. Select the channel by setting the channel dip switch to the ON position.
Setting Up Your Gigabit 2020 Transmitter (Gigabit 20T) Connecting the Transmitter to an Audio/Video Component Connect one set of audio/video cables to the audio/video jacks of the transmitter, matching the plug colors with the jacks on the transmitter. Transmitter Connect the other end of the cable to the audio/video jacks on the audiovisual component labeled LINE OUT, matching the plug colors with the jacks on the audio/video component. Some connection scenarios are shown on the next page.
Setting Up Your Gigabit 2020 Transmitter (Gigabit 20T) Connecting to Multiple Audio/Video Components Ta use your Gigabit 2020 for two or more audio/video component, first identify the last component in the chain and connect its LINE OUT jacks to the transmitter. If the final component of the chain does not have spare LINE OUT jacks, first use coaxial cable to connect the VHEF/UHE jacks on the TV and the lac component. Then connect the transmitter to the last component's LINE OUT jacks.
Setting Up Your Gigabit 2020 Receiver (Gigabit 20R) Connecting the Receivership oe Connect one set of audio/video cables to the audio/video jacks of the receiver, matching the plug colors with the jacks on the receiver. Fi Corine ct the other end of the cable to the audio/video jacks on the TV labeled LINE IN, matching the plug colors with the jacks on the TV. Some connection scenarios are shown on the next page. Note: For PAL systems, the connector on the audio/video component is a Cart socket.
Setting Up Your Gigabit 2020 receiver (Gigabit 208) Connecting to a TY With an Audio/Video Component J Araceli 7] (Gigapixel 20R) Plug one end of the provided power adapter into a wall outlet and the other end anti the rear of the receiver. Turn the ON/OFF switch to the ON position. The LED on the front of the unit should light. Place the receiver in a convenient location, then adjust its antenna so that the front (curved face) faces the room where the transmitters set up.
Setting Up Your Gigabit soother Applications Connecting to a Stereo System You can connect the Gigabit 2020 to your stereo system, to enjoy sound from your CD player, cassette deck, or radio, on speakers in another room. | @ Connect one set of audio/video cables to the two audio jacks (red and white) of the transmitter and to the stereo system, matching the plug colors with the jacks on the transmitter. The yellow video plugs not used.
RE Setting Up Your Gigabit soother Applications Receiving on a Computer In conjunction with a video capture or TV tuner device, you can turn your computer into a second TV without running wires between the computer and your audio/video component. the TV tuner device or video capture card, and to the video jack of the cS Connect the yellow video plug of the audio/video cable to the video jack on receiver.
Using the Remote Control Feature Audiovisual Source Component WL (J a Orienting Units for Optimal Performance Placing: Place the transmitter and receiver on a flat, stable surface to prevent damage from falling. For optimal performance, try to place the units as high as possible to avoid any possible interference from people walking between the transmitter and the receiver. Microwave ovens can cause interference.
Orienting Units for Optimal Performance The audio/video antennas have been designed to pivot but have limited rotation in either clockwise or counterclockwise directions. Antenna does not rotate freely 360 degrees. Rotating past the point where resistance is felt will result in permanent damage to both antenna and mechanical stopper. 25 Auto-Sequence Function for Multiple Location Monitoring The Gigabit 2020 Receiver's built in rut-sequence function is ideal for security use.
Auto-Sequence Function for Multiple Location Monitoring Note 1: The Receiver will auto detect the receiving channels, and display them in sequence. When only one channel dip switch is in the ON position, the receiver will receive the channel continuously, without regard to the position of the 5th dip switch.
Troubleshooting 2] If the signal is poor, or there is interference * Adjust the antennas orientation (see "Orienting Units for Optimal Performance", on page 24). ¢ Change the channel on both transmitter and receiver and make them the same.
Care and Maintenance * If the Gigabit 2020 is not working properly, facility. The personnel there will assist you, * Operate this product using only the power supply included with it or provided assn accessory * De not overload electrical outlets or ext shock Caution: Changes or modifications not exp void the user's authority to operate the equipment.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits arc designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
